Product Details:
|
Material: | Polyurea Coating | Color: | Slight Yellow Transparent |
---|---|---|---|
F420 Equivalent Of NH1420 Polyaspartic Polyurea Resin: | 190-210 | Viscosity Mpa.s/25℃: | 800-2000 |
Relative Density(25℃): | 1.06 | Shelf Life: | 12 Months |
Highlight: | Two Component Polyaspartic Polyurea Resin,12 Months Polyaspartic Polyurea Resin,Two Component polyurethane topcoats |
FEISPARTIC F420=NH1420 High Solid Polyaspartic Polyurea Resin
● FEISPARTIC F420 could be a polyurea coating, a chain extender, or an R component. It could also react with –NCO functional HDI trimmer from which a longer gelling time and excellent yellow resistance can be achieved. Longer gelling time can also be obtained when reacting with MDI pre-polymer. A hybrid polyurea and polyurethane can be completed when FEISPARTIC F420 is blended with a hydroxyl-functional resin such as acrylic and alkyd resin; FEISPARTIC F420 offers higher solid content and faster drying time than ordinary polyurethane. It is widely applied in formulating a variety of protective coatings.
● Main Feature
1. High solid content with low viscosity
2. Faster curing time in the aliphatic system
3. Offering excellent physical properties like high hardness, flexibility, elongation(400%), tear, and tensile strength(25MPa).
4. Great weathering and saline water resistance
Ⅲ Quality standard
Item |
Specifications |
Appearance |
Slight yellow transparent liquid |
Molecular Weight |
554 |
Solid Content |
97%±2% |
Amine value(mg KOH/g) |
190-210 |
Amine Equivalent(g/mol) |
277 |
Hydroxyl value Equivalent |
6.14 |
Viscosity mpa.s/25℃ |
800~2000 |
Relative density(25℃) |
1.06 |
Flash Point(/℃) |
97 |
Polyaspartic Property Advantage
Property | Polyaspartic polyurea | Conventional polyurethane | Spray polyurea |
Environmental property | Environmental friendly, construction solid content 70%-100% | Poor environmental protection, construction solid content 30%-40% | Good environmental protection, construction content 100% |
Reaction speed | Curing time adjustive,20min-4h, normally cure in 15-℃ | Low reaction speed, request curing temperature above 5-℃, curing time more than 24h in normal temperature | Rapid curing speed, from seconds to tens of seconds |
Adhesion with substrate | Don't need primer; the adhesion with carbon steel substrate is beyond 14Mpa, and the bonding with concrete reaches 4.5Mpa. | Need primer, adhesion with carbon steel substrate less than 8MPa, bonding with concrete is 2.5 Mpa. | Need primer, low adhesion |
Weather resistance | QUVA test reaches 4000h | QUVA test is 1000h at most | Poor weather resistance, QUVA <200h |
Film thickness | One-time construction film 50μm—1mm | One-time construction film 50μm——100μm | One-time construction film 0.6mm-2mm |
Mechanical properties | Rigidity hardness 2H,elongation 400%, tensile strength 25MP | Rigidity hardness 2H,elongation 400%, tensile strength 3MPa | Same as aspartic polyurea |
Construction | Multiple construction methods get rid of the restriction of specified equipment. | Same as aspartic polyurea | Relying on sizeable special equipment |
Contact Person: Annie Qing
Tel: +86 18307556691
Fax: 86-183-07556691