|Tensile Strength:||15MPA||Working Time:||30 Min- 2 Hour|
|Elongation At Break:||300%-400%||Feature:||Waterproofing|
Polyaspartic Toilet Waterproofing Chemicals,
Low Odor Waterproofing Chemicals,
Low Odor Two component Polyaspartic
Fast Cure Toilet waterproofing PS8800.
PS8800 is Two component Polyaspartic waterproofing varnish, direct to tile, for hand applications
PS 8800 is solvent-free,two-component, hand-applied, Polyaspartic clear coating.
2)FIELDS OF APPLICATION
PS 8800 is used in kitchen, toilet, and shower room waterproofing applications.
3)FEATURES AND BENEFITS
PS 8800 is a colorless clear coating
(a) Surface preparation& Repair
Clean the tile surface, and get rid of the dust and grease.
(b) Brush the vertical surface
Mix component A and component B with the ratio of 1: 0.45, make it stirred thoroughly. The height of the vertical surface is recommended to be higher.
than 1.5m, coverage is 0.2 kg/m2- 0.3 kg/m2( thickness about 0.15mm-0.25mm)
Begin the process at the top of the wall and work down to the floor. Complete the walls first and then begin the process on the floor.
Mix component A and component B with the ratio of 1: 0.45, make it stirred thoroughly. Recommended coverage is 0.3 kg/m2-0.4 kg/m2( thickness about 0.2mm-0.3mm)
Using a natural-bristle brush, apply one coat covering all surface area evenly with a layer of PS 8800.
Keep the room ventilatory for 8-12 hours; then, it’s open.
|Solid content by weight||≥95%|
|Tensile strength||＞15 MPa|
|Working time||30 Min- 2 Hour|
9.7Mpa to the tile surface
4.5Mpa to concrete
|Elongation at break||300%-400%|
Contact Person: Annie Qing
Tel: +86 18307556691