|
Product Details:
|
| Certification: | REACH, ISO 9001-2008, ISO 14001-2004 | Name: | Feiyang Polyaspartic Polyurea |
|---|---|---|---|
| High Construct Solid Content: | 70~100% | Feature: | Good Color Stable |
| High Light: | REACH Polyasdpartic Polyurea,Color Stable Polyasdpartic Polyurea |
||
Performance comparison of Feiyang Polyasdpartic Polyurea & Epoxy coating
| Feiyang Polyaspartic Polyurea |
Epoxy coating
|
| Not affected by temperature,-15℃-40℃,humidity≤85% can construct,and quick dry(30min-5h) | Hard to construct under low temperatures, need heat or other assistance, and is hard to cure under low temperatures. (above 48h) |
| Good color stable and anti-QUV; color does not change, and no chalking for 15 years outdoors. | Good color stable and anti-QUV, easy to crack, delaminate. |
| It can adjust to rigid and elastic, in which hard material possesses perfect hardness while keeping certain flexibility. | It can only do a hard coat and has low flexibility. |
| Excellent anti-abrasion and anti-impact performance | Bad anti-abrasion and anti-impact performance, delaminate easily affected by an outside force. |
| Specification | Polyaspartic | Spray polyurea | One component polyurea |
Ⅲ polyurethane type
|
| Pot life(viscosity double increased) | ＞30min | ＜45s | Not required | Not required |
| Solid content%(apply) | ＞95% | ＞98% | ＞80% | ＞92% |
| Plasticizer | ＜0.1% | yes | yes | yes |
| Drying property in low temperature | ＞-15℃ | Not limited | / | / |
| Tensile strength MPA | ＞15 | ＞10/16 | ＞15/20 | ＞12 |
| Breaking elongation % | ＞300 | ＞300/400 | ＞300/200 | ＞250 |
| Adhesion to concrete(no primer)MPA | ＞2.5(substrate damaged) | Primer needed | Primer needed | Primer needed |
| Tear strength(N/mm) | ＞70 | ＞40/50 | Not required | ＞40 |
| Water absorption% | ＜3 | ＜5 | ＜5 | ＜5 |
| Artificial weathering aging | 2000h | Not required | 1500h | 1000h |
| Possible to make high-strength and anti-abrasion mortar | Can add 1-3 times quartz sand | no | Basically no | Basically no |
| Initial viscosity(25℃, cps, mix part A and B) | ＜2000 | Not required | Not required | Not required |
Contact Person: Annie Qing
Tel: +86 18307556691
Fax: 86-183-07556691
