|
Product Details:
|
Model: | E2863XP | NCO-content: | 11 |
---|---|---|---|
Viscosity: | 1350 | Monomer Content: | < 0.3% |
NCO Equivalent Weight: | 380 | Flash Point: | 184 |
Highlight: | DESMODUR E2863XP Isocyanate HT 100,Light Stable Isocyanate HT 100 |
DESMODUR E2863XP
1. Characterization
Aliphatic ester groups containing prepolymer based on hexamethylene-1,6-diisocyanate (HDI).
Hardener for solvent-free polyurethane coatings.
2. Specification
Property | Value | Unit of measurement | Method |
NCO-content | approx. 11 | % | M105-ISO 11909 |
Viscosity (23 °C) | approx. 1,350 | mPa·s | M014-ISO 3219/A.3 |
Monomer content | < 0.3 | % | M106-ISO 10283 |
NCO equivalent weight | approx. 380 | g | |
Flash point | approx. 184 | °C | DIN EN ISO 2719 |
Density at 20 °C | approx. 1.11 | g/cm3 | DIN 51 757 |
3.Properties / Applications
Desmodur® E 2863 XP can be used in combination with suitable polyols
and aliphatic amines, for example, from the Desmophen® NH-family, to formulate light-stable 2-component polyurethane- and polyurea-coatings with elastic properties.
4. Storage
- Storage in original sealed Covestro container.
- Recommended storage temperature: 10 - 30 °C.
- Protect from moisture, heat, and foreign material.
General information: The product is sensitive to moisture and should therefore be stored in tightly sealed containers. Storage at elevated temperatures will lead to an increase in viscosity and a reduction of the NCO content.
6. Further information
The product is used mainly as a hardener in coating materials or adhesives. The handling of coating materials or adhesives containing reactive polyisocyanates and residual monomeric HDI requires appropriate protective measures referred to in the safety data sheet. These products may therefore be used only in industrial or trade applications. They are not suitable for use in homeworker (DIY) applications.
Learn polyaspartic knowledge: Polyaspartic FAQ
Contact Person: Annie Qing
Tel: +86 18307556691
Fax: 86-183-07556691