|Model:||N3400||Desmodur® N 3400 Is Used Primarily As A Reactive Thinner Or As A Hardener Component For:||21.8 ± 0.7|
|Viscosity At 23 °C:||175±15||Equivalent Weight:||193|
|Flash Point:||180||Density At 20 °C:||1.14|
Low Viscosity DESMODUR N 3400,
DESMODUR N 3400 For Lightfast
Aliphatic polyisocyanate (HDI trimer).
As the hardener component for lightfast polyurethane coating systems.
|Property||Value||Unit of measurement||Method|
21.8 ± 0.7
|%||DIN EN ISO 11 909|
|Viscosity at 23 °C||175±15||mPa·s||DIN EN ISO 3219/A.3|
|Color value (Hazen)||≤ 80||DIN EN 1557|
|Monomeric HDI||< 0.3||%||DIN EN ISO 10 283|
|Viscosity at 25 °C||approx. 140||mPa·s||DIN EN ISO 3219/A.3|
|Equivalent weight||approx. 193|
|Flash point||approx. 180||°C||DIN 22 719|
|Density at 20 °C||approx. 1.14||g/ml||DIN EN ISO 2811|
3. Solubility / thinnability
Desmodur® N 3400 can be thinned with esters, ketones, and aromatic hydrocarbons such as ethyl acetate, butyl acetate, methoxy propyl acetate, acetone, methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene, xylene, solvent naphtha® 100 and mixtures thereof.
Generally speaking, it has good compatibility with the solvents listed. However, the solutions formed must be tested for their storage stability. Only PU-grade solvents should be used (max. 0.05 % water, absence of reactive hydroxyl or amino groups). Aliphatic hydrocarbons are unsuitable as solvents.
Desmodur® N 3400 should not be thinned to below a solids content of 40 %. Prolonged solution storage with a lower binder content may result in turbidity and sedimentation.
Generally speaking, Desmodur® N 3400 can be mixed with the following products: aliphatic polyisocyanates such as Desmodur® N 100, N 75, N 3200, ultra N 3300, N 3600 and Desmodur® Z 4470; aromatic polyisocyanates such as Desmodur® L/ultra L, HL and IL/ultra IL; polyester polyols such as Desmophen® 670 and polyacrylates. However, the compatibility of the combinations used should constantly be tested.
Desmodur® N 3400 is only compatible with branched polyester polyols such as Desmophen® 651.
5.Properties / Applications
Desmodur® N 3400 is used primarily as a reactive thinner or hardener component for lightfast two-component polyurethane coatings and as a binder for moisture-curing one-component polyurethane coatings. In two-component systems, Desmodur® N 3400 is usually mixed with other
aliphatic polyisocyanates such as Desmodur® N 3200, ultra N 3300, N 3600, and Z 4470. Preferred co-reactants are polyacrylate polyols.
In one-component polyurethane systems, Desmodur® N 3400 is used as the sole binder or mixed with other polyisocyanates such as Desmodur® N 3200 and ultra N 3300.
Due to its low viscosity, Desmodur® N 3400 can also be used as the hardener for aqueous two-component polyurethane coatings.
- Storage in original sealed Covestro container.
- Recommended storage temperature: 10 - 30 °C.
- Protect from moisture, heat, and foreign material.
General information: The product is sensitive to moisture and should therefore be stored in tightly sealed containers. Storage at elevated temperatures will lead to an increase in viscosity and a reduction of the NCO content.
Contact Person: Annie Qing
Tel: +86 18307556691