Product Details:
|
Model: | N3300 | ||
---|---|---|---|
Highlight: | Aliphatic Isocyanate Hardener,Isocyanate Hardener For Lightfast,ISO 14001 Aliphatic polyisocyanate HDI trimer |
N3300 Aliphatic polyisocyanate HDI trimer
1. Characterization
Aliphatic polyisocyanate (HDI trimer).
As the hardener component for lightfast polyurethane coating systems.
2.Properties / Applications
Desmodur® N 3300 is used primarily as the hardener component for lightfast
two-component polyurethane coatings with high resistance to chemicals and weathering, excellent gloss retention, and outstanding mechanical properties. Preferred co-reactants are polyacrylate or polyester polyols.
The main applications for systems based on Desmodur® N 3300 are air- and force-drying coatings for automotive OEM, automotive refinishing, transportation, industrial finishing, and plastics.
3. Compatibility
Generally speaking, Desmodur® N 3300 can be mixed with the following products: aliphatic polyisocyanates such as Desmodur® N 100, N 75, N 3200, N 3400, N 3600 and Desmodur® Z 4470; aromatic polyisocyanates such as Desmodur® L, HL, and IL; polyester polyols such as Desmophen® 670;
polyacrylates such as the Desmophen® A products. However, the compatibility of the combinations used should constantly be tested.
Desmodur® N 3300 is incompatible with branched polyester polyols such as Desmophen® 651 or polyether polyols such as Desmophen® 1380 BT.
4. Specification
Property | Value | Unit of measurement | Method |
NCO content | 21.8 ± 0.3 | % | DIN EN ISO 11 909 |
Viscosity at 23 °C | 3,000 ± 750 | mPa·s | DIN EN ISO 3219/A.3 |
Color value (Hazen) | ≤ 40 | DIN EN 1557 | |
Monomeric HDI | < 0.15 | % | DIN EN ISO 10 283 |
Viscosity at 25 °C | approx. 2,500 | mPa·s | DIN EN ISO 3219/A.3 |
Equivalent weight | approx. 193 | ||
Flash point | approx. 228 | °C | DIN 22 719 |
Density at 20 °C | approx. 1.16 | g/ml | DIN EN ISO 2811 |
5. Solubility & thinnability
Desmodur® N 3300 can be thinned with esters, ketones, and aromatic
hydrocarbons such as ethyl acetate, butyl acetate, PMA, acetone, methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene,
xylene, solvent naphtha® 100, and mixtures thereof.
Generally speaking, it has good compatibility with the solvents listed. However, the solutions formed must be tested for their storage stability. Only PU-grade solvents should be used (max. 0.05 % water, absence of reactive hydroxyl or amino groups). Aliphatic hydrocarbons are unsuitable as solvents.
Desmodur® N 3300 should not be thinned below a solids content of 40 %. Prolonged solution storage with a lower binder content may result in turbidity and sedimentation.
6.Properties & Applications
Desmodur® N 3300 is used primarily as the hardener component for lightfast
two-component polyurethane coatings with high resistance to chemicals and weathering, excellent gloss retention, and outstanding mechanical properties. Preferred co-reactants are polyacrylate or polyester polyols.
The main applications for systems based on Desmodur® N 3300 are air- and force-drying coatings for automotive OEM, automotive refinishing, transportation, industrial finishing, and plastics.
7. Storage & storage time
- Storage in original sealed Covestro container.
- Recommended storage temperature: 10 - 30 °C.
- Protect from moisture, heat, and foreign material.
General information: The product is sensitive to moisture and should therefore be stored in tightly sealed containers. Storage at elevated temperatures will lead to an increase in viscosity and a reduction of the NCO content.
Covestro represents that, for six months following the day of shipment as stated in the respective transport documents, the product will meet the specifications or values outlined in section "specifications or characteristic data" above, whatever is applicable, provided that the product is stored in full compliance with the storage conditions outlined in and referenced under section "storage" above and is otherwise handled appropriately.
The lapse of six months does not necessarily mean that the product no longer meets specifications or the set values. Covestro does not make any representation regarding the product after the lapse of six months. Co vestro shall not be responsible or liable in any way for the development failing to meet specifications or the set values after the lapse of six months. However, before using said product, Covestro recommends testing such a product to see if it still meets the specifications or the set values.
Learn polyaspartic knowledge: Polyaspartic FAQ
Contact Person: Annie Qing
Tel: +86 18307556691
Fax: 86-183-07556691