|
Product Details:
|
| Relative Density: | 0.98 | Viscosity: | 200-1000 |
|---|
PROFILE
YD-151K is a fatty amine modified epoxy hardener with light color and very good initial hardness and strength build-up time. It is recommended to be applied in stone dry-hanging adhesive pure white formula, epoxy joints and other fields.
ADVANTAGES
Hardness and strength build up quickly, cost-effective.
Low odor.
APPLICATIONS
Pure white dry hanging glue.
Epoxy jointing agent.
Bonding and other fields.
STORAGE
It should be sealed in its original packaging and stored in a dry place at a temperature range of 0-40°C (the temperature must not fall below 0°C). It should not be placed in direct sunlight.
INDEX
|
Appearance |
Colorless transparent liquid |
| Viscosity (25℃) |
200-1000 |
|
Amine value |
390±30 |
| Relative density (g/ml/25℃) |
0.98 |
| Active Hydrogen Equivalent Weight (AHEW) |
98 |
|
Grams of epoxy curing agent required for 100 grams of E-51 epoxy resin |
50 |
BASIC FEATURES
| Pot life (25°C, 100g): | 10-25 min |
| Film Drying Time (3mm, 25°C) |
2-4h |
| Shore D Hardness (after 48 hours) |
≥82 |
|
Steel-to-steel shear① |
≥15MPa |
|
Bending elasticity |
＞2000 |
Basic data is based on the E-51 epoxy resin (E-51 is bisphenol A type, with an epoxy equivalent of 180-190).
Note: ① Above experimental data: 128 resin: 151K curing agent = 100:50, add two times the mass of powder.
Curing conditions: 25℃×24h, 80℃×1h
Contact Person: Annie Qing
Tel: +86 18307556691
Fax: 86-183-07556691
