|
Product Details:
|
| Relative Density: | 0.98 | Viscosity: | 2000-10000 |
|---|
PROFILE
YD-5406-1 is a cashew phenol amine epoxy curing agent with very good adhesion and greatly reduced strength building time. It can also have a good curing effect at a low temperature of 5 degrees Celsius, which is faster than traditional polyamide.
ADVANTAGES
Excellent adhesion.
Faster curing speed than polyamide.
APPLICATIONS
Bonding
Anti-corrosion
STORAGE
It should be sealed in its original packaging and stored in a dry place at a temperature range of 0-40°C (the temperature must not fall below 0°C). It should not be placed in direct sunlight.
INDEX
|
Appearance |
Brown red viscous liquid |
| Viscosity (25℃) |
2000-10000 |
|
Amine value |
210±30 |
| Relative density (25℃) |
0.98 |
| Active Hydrogen Equivalent Weight (AHEW) |
190 |
|
Resin Addition Amount (per 100g)/g |
100 |
BASIC FEATURES
| Working Time (25°C, 100g): |
1.5-3h |
| Shore D Hardness 48h |
≥75D |
|
Tinplate sheet adhesion ① |
Level 0-1 |
The above data pertains to the formulation when used with a bisphenol A type epoxy resin with an equivalent weight of 180-190.
Note: ① The above data: 128 resin: curing agent: xylene mixed solvent (xylene 30% + anhydrous ethanol 30% + C3H6O 40%) = 100:100:100, 100μm wet film was prepared and cured at 80℃×1h, and the adhesion based hundred grid test.
Learn polyaspartic knowledge: Polyaspartic FAQ
Contact Person: Annie Qing
Tel: +86 18307556691
Fax: 86-183-07556691
