Product Details:
|
Model: | F330 | Color: | Colorless To Light Yellow Green Transparent Liquid |
---|---|---|---|
Amine Value(mg KOH/g): | 165-185 | Equivalent Weight(g/mol): | 334 |
Viscosity: | 250-600 | Feature: | High Elongation And High Elastic |
Highlight: | Floor Coatings Elastic Polyaspartic Resin,ISO 14001 Elastic Polyaspartic Resin |
FEISPARTIC F330 Floor Coatings Elastic Polyaspartic Polyurea Resin
1. Model: F330
● Chemical Name: Aspartic Acid, Polyaspartic Polyurea Resin
2. Properties and application
●FEISPARTIC F330 is a high solid and low viscosity resin; viscosity is as low as 200mPa.s, it can be made into high-solid low, viscosity environmental protection coatings.
●FEISPARTIC F330 has moderate reactivity and can prolong polyurea hand brush construction time.
●The film made of FEISPARTIC F330 has excellent elastic resilience, flow, gloss, and touch.
●FEISPARTIC F330 can react with our flexible curing agent to make excellent mechanical properties elastic material; the elongation can reach 400%.
3. Main Feature
1. F330 could make good elastic resilience solvent-free floor coatings.
2. F330 could be used to produce high elongation and high elastic waterproof coating.
3. F330 could be used to produce solvent-free adhesives and sealing material.
INDEX | VALUE |
Appearance | Colorless to light yellow green transparent liquid |
Hazen (Pt-Co) | ≤250 |
Solid Content(%) | 97±2 |
Amine value(mg KOH/g) | 165~185 |
Amine Equivalent(g/mol) | 334 |
Equivalently hydroxy content(%) | 5.09 |
Viscosity(mpa.s/25℃) | 250~600 |
Relative density (25℃) | 1.06±0.02 |
6. Polyaspartic Property Advantage
Property | Polyaspartic polyurea | Conventional polyurethane | Spray polyurea |
Environmental property | Environmental friendly, construction solid content 70%-100% | Poor environmental protection, construction solid content 30%-40% | Good environmental protection, construction content 100% |
Reaction speed | Curing time adjustive,20min-4h, normally cure in 15-℃ | Low reaction speed, request curing temperature above 5-℃, curing time more than 24h in normal temperature | Rapid curing speed, from seconds to tens of seconds |
Adhesion with substrate | Don’t need primer; the adhesion with carbon steel substrate is beyond 14Mpa, and the bonding with concrete reaches 4.5Mpa. | Need primer, adhesion with carbon steel substrate less than 8MPa, bonding with concrete is 2.5 Mpa. | Need primer, low adhesion |
Weather resistance | QUVA test reaches 4000h | QUVA test is 1000h at most | Poor weather resistance, QUVA <200h |
Film thickness | One-time construction film 50μm—1mm | One-time construction film 50μm——100μm | One-time construction film 0.6mm-2mm |
Mechanical properties | Rigidity hardness 2H,elongation 400%, tensile strength 25MP | Rigidity hardness 2H,elongation 400%, tensile strength 3MPa | Same as aspartic polyurea |
Construction | Multiple construction methods get rid of the restriction of specified equipment. | Same as aspartic polyurea | Relying on sizeable special equipment |
Contact Person: Annie Qing
Tel: +86 18307556691
Fax: 86-183-07556691