|
Product Details:
|
| Pot Life: | 25min | Solid Content: | 95 |
|---|---|---|---|
| Touch Dry Time 25℃: | 3h | Hard Dry Time 25℃: | 24h |
| Thickness: | 0.1-0.3 | Glossness: | 95 |
| High Light: | ISO 19001 Polyaspartic Flooring Coating,Self Leveling Polyaspartic Flooring Coating |
||
1. Rigid Polyaspartic Clearcoat Guide Formulation
|
Rigid Polyaspartic Clearcoat Guide Formulation |
|||||||
|
Component |
Polyaspartic resins and HDI trimer hardener |
||||||
|
Curing method |
Cure at normal temperature |
||||||
|
Characters |
Weather resistance, non-yellowing, high solid content |
||||||
|
|
|||||||
|
A component |
|
B component |
|||||
|
Material |
Content |
Supplier |
Process |
Material |
Content |
Supplier |
|
|
F420 |
23.8 |
Feiyang |
Mix at room temperature |
HDT-LV2 |
100 |
Vencorex |
|
|
F525 |
63 |
Feiyang |
|
|
|
||
|
wetting agent1375 |
0.3 |
Boshi |
|
|
|
||
|
BYK1790 |
0.3 |
BYK |
|
|
|
||
|
BYK066N |
0.3 |
BYK |
|
|
|
||
|
A3 molecular sieve |
10 |
From China |
|
|
|
||
|
BYk358 |
0.3 |
BYK |
|
|
|
||
|
PDGA |
2 |
Feiyang |
|
|
|
||
|
Total |
100 |
|
|
Total |
100 |
|
|
|
|
|||||||
|
Ratio:A: B=2:1 |
|||||||
|
|
|||||||
|
Specifications |
|
Construction Description |
|||||
|
Pot life |
25min |
Construction by roller. |
|||||
|
Solid content |
95 |
||||||
|
Touch dry time 25℃ |
3hr |
||||||
|
Hard, dry time 25℃ |
24hr |
||||||
|
Thickness |
0.1~0.3mm |
||||||
|
Hardness |
H |
||||||
|
Elongation |
-- |
||||||
|
Tensile strength |
-- |
||||||
|
Resilience force |
-- |
||||||
|
Glasses |
95 |
||||||
|
|
|||||||
|
|
|||||||
|
SHENZHEN FEIYANG PROTECH CORP., LTD |
|||||||
|
Feiyang Tech-Park, 8 Longchang Road, Bao'an Dist, 518101 Shenzhen, GD, China |
Tel: +86(755)-36694812 |
||||||
2. Polyaspartic Property Advantage
| Property | Polyaspartic polyurea | Conventional polyurethane | Spray polyurea |
| Environmental property | Environmental friendly, construction solid content 70%-100% | Poor environmental protection, construction solid content 30%-40% | Good environmental protection, construction content 100% |
| Reaction speed | Curing time adjustive,20min-4h, normally cure in 15-℃ | Low reaction speed, request curing temperature above 5-℃, curing time more than 24h in normal temperature | Rapid curing speed, from seconds to tens of seconds |
| Adhesion with substrate | Don't need primer; the adhesion with carbon steel substrate is beyond 14Mpa, and the bonding with concrete reaches 4.5Mpa. | Need primer, adhesion with carbon steel substrate less than 8MPa, bonding with concrete is 2.5 Mpa. | Need primer, low adhesion |
| Weather resistance | QUVA test reaches 4000h | QUVA test is 1000h at most | Poor weather resistance, QUVA ＜200h |
| Film thickness | One-time construction film 50μm—1mm | One-time construction film 50μm——100μm | One-time construction film 0.6mm-2mm |
| Mechanical properties | Rigidity hardness 2H,elongation 400%, tensile strength 25MP | Rigidity hardness 2H,elongation 400%, tensile strength 3MPa | Same as aspartic polyurea |
| Construction | Multiple construction methods get rid of the restriction of specified equipment. | Same as aspartic polyurea | Relying on sizeable special equipment |
Learn polyaspartic knowledge: Polyaspartic FAQ
Contact Person: Annie Qing
Tel: +86 18307556691
Fax: 86-183-07556691
